Lever Wire Connectors for LED Wiring – 10 Pack
2 Port – 10 Pack
$5.00
Skip to product information
Lever Wire Connectors for LED Wiring – 10 Pack
$5.00
Product SKU:
BHL-2PORT-LEVER
Lever wire connectors for LED lights provide a clean, reusable way to join solid or stranded conductors in low-voltage lighting projects. Each option contains 10 connectors. Choose a 2-port connector for a simple pass-through connection or a 3-port connector when one conductor needs to join two others.
Lever wire connectors for LED lights
- Controller and accessory leads Make serviceable connections without twisting wires together.
- Extensions and transitions Join solid or stranded conductors used in low-voltage LED projects.
- Testing and maintenance Reopen the lever when a connection needs to be inspected or changed.
2-port and 3-port connector 10-packs
| Option | Typical use | Price |
|---|---|---|
| 2 Port — 10 Pack | Join two conductors | $5.00 |
| 3 Port — 10 Pack | Join three conductors at one point | $7.00 |
Pack contents: 10 connectors of the selected port count. Works with solid or stranded wire used in low-voltage lighting projects.
Ratings, wire preparation, and moisture protection
Use only wire sizes and electrical loads permitted by the ratings marked on the connector. Strip each conductor to the length marked on the connector itself; do not leave exposed copper outside the housing.
This product listing does not claim that these connectors are waterproof. Protect connections from moisture with an enclosure appropriate for the installation.
How to use a lever wire connector
- Disconnect power from the lighting system.
- Strip the conductor to the length marked on the connector.
- Lift the lever, insert the conductor fully, and close the lever.
- Gently tug each wire to confirm it is secure.
- Verify power polarity and LED data direction before restoring power.
- Place the completed connection in a suitable enclosure where moisture may be present.
Complete your low-voltage LED wiring
Use these connectors with the XConnect male/female pigtail pair, Power Injection T, or BHL WLED controller. For a complete system, see the Permanent LED Lights Complete Bundle or the DIY tracks and lights bundle.
Low-voltage LED wiring only
These connectors are offered for low-voltage LED wiring. Do not assume they are suitable for household line-voltage or branch-circuit wiring. Follow the ratings marked on the connector, applicable electrical requirements, and the instructions for every connected component. Consult a qualified electrician when the installation is outside your experience.
Lever wire connector questions
How many connectors are included?
Each option includes 10 connectors. Select either the 2-port 10 pack or the 3-port 10 pack.
Can these connectors hold solid and stranded wire?
Yes. They are intended for solid or stranded wire used in low-voltage lighting projects. Confirm that your wire fits the ratings marked on the connector.
Can I reuse a lever connector?
Yes. With power disconnected, lift the lever to remove or replace a conductor, then close it and perform a gentle tug test.
Are these connectors waterproof?
This listing does not claim a waterproof rating. Use an enclosure appropriate for the environment anywhere a connection may be exposed to moisture.
Can I use these for household electrical wiring?
They are sold here for low-voltage LED wiring. Do not use them for household line-voltage wiring unless the connector markings, applicable codes, and a qualified professional confirm that application.
Choose your options